Products


Plate

  • 3/16” through 12” thick
  • A36 Standard specification for carbon structural steel hot rolled and pickled and oiled (up to ½”)
  • 572-50/65 Standard specification for high-strength low-alloy steel
  • A588 Standard specification for high-strength low-alloy steel – weathering application
  • 656-80 & 715-80 High Yield
  • 516-70 Standard specification for pressure vessel plates, carbon steel, for moderate-and-lower-temperature service
  • AR – 235/400/500 & A514 Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding
  • Formalloy 400 Standard specification for forming grade high-yield-strength, quenched and tempered alloy steel plate, suitable for welding
  • Domex Forming Grade High Yield Steel, 100 min KSI
  • A786 Diamond Floor Plate
  • Weldox, Hardox Available Upon Request
  • 4140/1045 Stocking Sizes Available

Sheet/Coil

  • 10ga through 1/2” coil available up to 84” wide (inquire on 96” wide coil needs)
    • Stocking lengths 96″,120″,144″ & 240″ long, capable of leveling 840” long
  • 30ga through 11ga coil available up to 72” wide
    • Stocking lengths 96″,120″, 144″ long, inquire on lengths over 240”
Specifications:
  • A1011 Standard specification for commercial quality sheet produced from low carbon steel. Hot Rolled and Pickled and Oiled
  • A1011-50 Standard specification for commercial quality high-strength steel
  • A1008 Standard specification for Cold Rolled Sheet

 


Wide Flange Beam and Channel

Wide Flange Beams:

  • 20’ through 65’ long in 5’ increments
  • W4”-40”

Channels:

  • 20’ through 65’ long in 5’ increments
  • Miscellaneous Channel 4”-18”
  • Structural Channel 3”-15”
  • Bar Channel ¾” – 2-1/2”
  • Junior Channel 8”-12”
Specifications:
  • A36 Standard specification for carbon structural steel
  • A572 Standard specification for high-strength low-alloy structural steel
  • A588 Standard specification for high-strength low-alloy structural steel – weathering applications
  • A709 Standard specification for carbon and high-strength low-alloy shapes
    • This specification covers shapes, and bars intended for use in bridges. Seven grades are available in four yield strengths
  • A992 Standard specification for steel for structural shapes for use in building framing

Tubing and Pipe

Tube:

  • DOM, CDSMLS and Specialty Shapes Upon Request
  • Round ½” through 18” diameter .049 – .500 wall
  • Square ½” through 16” square .049 – .625 wall
  • Rectangular 1 x ½ through 20 x 12 rect. .049 – .625 wall

 

Ornamental Tube:

  • 20, 24 and 40 foot lengths .049 through .120 wall
  • Bare and Painted in stock
Specifications:
  • A513 Standard specification for welded mechanical tube

 

Structural Tube:

  • 20’ through 60’ in 4 foot increments
  • .188 through .625 wall
Specifications:
  • A500A/B/C Standard specification for cold formed welded tube

Pipe:

  • 20,21 & 40’ stocking lengths (Inquire on specialty lengths)
  • Bare and Coated (galvanized available upon request)
  • Sch. 40 and 80 (Sch. 10,30 available upon request)
Specifications:
  • A53A/B Standard specifications for welded and seamless pipe, hydrostatic-tested, weldable, formable
  • A513 Standard specification for mechanical tubing – not hydrostatic tested

 

Column Pipe:

  • Available in 2’ through – 20’ in multiple increments
Specifications:
  • A53A/B Standard specifications for welded and seamless pipe, hydrostatic-tested, weldable, formable
  • 6” Well Pipe 6.625 OD x .250 wall
  • 8” Well Pipe 8.625 OD x .250 wall
  • 10” Well Pipe 10.75 OD x .279 wall
  • 12” Well Pipe 12.75 OD x .375 wall
  • Thread Protectors (end caps) 4” though 12”
  • Steel and Cast Couplings 4” though 12”

Expanded Metal and Grating

  • Long Way, Short Way and Galvanized Available
  • Flattened and Expanded Metal 1/4 No. 18 through 1-1/2 No. 9
  • Expanded Metal Grating 1/4 No. 18 through 1-1/2 No. 6
  • Diamond Grip 3.0lb through 7.0 lb
  • Bar Grating S-1 though S-12
  • Mebac, Perforated and SlipNot available upon request

 

 


Bars and Shapes

Hot Rolled

  • Flat Bar and UM Plate (20’ lengths)
  • Bar and Structural Angle (20’, 40’ lengths)
  • Round and Square Bar (20’ lengths)
  • Jr. I Beam (20’, 40’ lengths)
  • I Beam (20, 40’ lengths)
Specifications:
  • A36 Standard specification for carbon structural steel
  • A572-50 Standard specification for high-strength low-alloy steel
  • Dual specified A36/572-50 both specifications are met

 

Cold Rolled

Cold Rolled

  • Cold Finished Flat Bar (12’ lengths)
  • Cold Finished Round (12’ lengths)
  • Cold Finished Square (12’ lengths)
Specifications:
  • A1018 Standard specification for low carbon steel
  • A1045 Standard specification for medium carbon, greater strength
  • A1045 TG&P Standard specification for machined turn ground and polished bars, greater accuracy on length and diameter